Monthly Archives: February 2016

How To Single-Handedly Install A Gutter System

Hiring a professional to replace ones gutter could cost tons and therefore people nowadays prefer doing it by themselves. Some contractors have been caught stealing material and installing the gutter in the wrong manner. At first it may seem hard, but if one follows a proper set of instructions then they can successfully install a gutter system.

Where to start when replacing a system?

The goal of this is to save money and to optimise the usage of the resources than wasting money on excess material. The gutter can be tailored to suit ones taste. Before committing to a gutter replacement, one must first evaluate and plan the whole process. The total area of the house should be taken into account and a rough sketch of the plan should be drawn. Visit this link for more information about gutter replacement in Brisbane.

Then the amount of gutters required for it must be listed and the total cost should be calculated. This makes it convenient for a person as they could bargain to get a good quality gutter for a lower price which is a win win opportunity. To the list of goods one must add other essential materials that are needed for a gutter replacement such as down spouts, rivets, head screws, elbow, sealant and gutter flashing. Once that’s done its time to get started!

Get started with the installation

It is always recommended to watch a video regarding the process or ask some experienced professional regarding the installation before starting it by your own. As always safety come first and necessary precautions must be taken to avoid any causality. It is best to assemble the parts of the gutter on the ground than up on the roof. After the assembly is complete use sealants inside the gutter to prevent any leaks and fastened the rivets between the gutters. Then add the down spouts to complete the gutter system. More number of down spouts will ensure water to empty much faster. Place the gutter on the roof and fasten them securely. Usage of flashing is a must as it prevents water running behind the gutters which can cause some serious damage to the house. For extra support hangers could be added but this is optional. Last but not least elbows must be fixed onto the down spouts and this marks the end of the installation of the gutter system.

Re-check for any faulty gutter

Run some water on the gutter to check for any holes or cracks formed while installing the gutter. If they are present then use sealant to seal them but if it’s a major crack a new gutter might have to be put in place of the faulty one. Majority of people prefer to go for the seamless gutter system as it doesn’t have to be assembled and thus will be of less work then the normal ones. After you complete the check you are ready to embrace you home.